August 2025
1 - 30 Aug 2025
5 weeks, 12:00 AM - 12:00 AM
The regulations require a 'Certified Handler' (CH) to handle acutely toxic (6.1A and 6.1B, or GHS Cat. 1 and Cat 2) substances. Certified Handler steps: 1. Learn and get independent experience* 2. Complete the CH application form (application fee applies upon submission) 3. Provide satisfactory evidence and proof of your knowledge and competence 4. Obtain yo certified handler compliance certificate *under the regulations a CH certifying compliance officer cannot perform your CH training.
Mon 25 Aug 2025
8:30 AM - 2:00 PM (5 hours 30 minutes)
This course provides practical, task-related knowledge and skills with a focus on agrichemical safety. The emphasis is on following workplace procedures and label instructions. For the practical component of the assessment, there are practical tasks on the day of course and after the course you are required to undertake a spray activity and provide your spray diary and documentation from your supervisor/employer confirming your competency Five Level 2 NZQA credits are available for this course.
Mon 25 Aug 2025
1 day, 8:30 AM - 4:30 PM (8 hours)
This course is for agrichemical users working independently (ie with little or no supervision) with responsibility for a single site/property, and may have responsibility for themselves and perhaps managing or supervising others. Eight Level 3 NZQA credits are available for this course.
Mon 25 Aug 2025
8:30 AM - 3:30 PM (7 hours)
This course is for existing Growsafe Certificate holders wishing to renew their current certificate. You must have a current certificate, or it must not be expired by more than 12 months. Eight Level 3 NZQA credits are available for this course.
Tue 26 Aug 2025
8:30 AM - 2:00 PM (5 hours 30 minutes)
This course provides practical, task-related knowledge and skills with a focus on agrichemical safety. The emphasis is on following workplace procedures and label instructions. For the practical component of the assessment, there are practical tasks on the day of course and after the course you are required to undertake a spray activity and provide your spray diary and documentation from your supervisor/employer confirming your competency Five Level 2 NZQA credits are available for this course.
Tue 26 Aug 2025
1 day, 8:30 AM - 4:30 PM (8 hours)
This course is for agrichemical users working independently (ie with little or no supervision) with responsibility for a single site/property, and may have responsibility for themselves and perhaps managing or supervising others. Eight Level 3 NZQA credits are available for this course.
Tue 26 Aug 2025
8:30 AM - 3:30 PM (7 hours)
This course is for existing Growsafe Certificate holders wishing to renew their current certificate. You must have a current certificate, or it must not be expired by more than 12 months. Eight Level 3 NZQA credits are available for this course.
Wed 27 Aug 2025
1 day, 8:30 AM - 4:30 PM (8 hours)
This course is for agrichemical users working independently (ie with little or no supervision) with responsibility for a single site/property, and may have responsibility for themselves and perhaps managing or supervising others. Eight Level 3 NZQA credits are available for this course.
Wed 27 Aug 2025
8:30 AM - 3:30 PM (7 hours)
This course is for existing Growsafe Certificate holders wishing to renew their current certificate. You must have a current certificate, or it must not be expired by more than 12 months. Eight Level 3 NZQA credits are available for this course.
Thu 28 Aug 2025
8:30 AM - 2:00 PM (5 hours 30 minutes)
This course provides practical, task-related knowledge and skills with a focus on agrichemical safety. The emphasis is on following workplace procedures and label instructions. For the practical component of the assessment, there are practical tasks on the day of course and after the course you are required to undertake a spray activity and provide your spray diary and documentation from your supervisor/employer confirming your competency Five Level 2 NZQA credits are available for this course.
September 2025
1 - 30 Sep 2025
5 weeks, 8:30 AM - 4:00 PM
The regulations require a 'Certified Handler' (CH) to handle acutely toxic (6.1A and 6.1B, or GHS Cat. 1 and Cat 2) substances. Certified Handler steps: 1. Learn and get independent experience* 2. Complete the CH application form (application fee applies upon submission) 3. Provide satisfactory evidence and proof of your knowledge and competence 4. Obtain yo certified handler compliance certificate *under the regulations a CH certifying compliance officer cannot perform your CH training.
Mon 1 Sep 2025
8:30 AM - 2:00 PM (5 hours 30 minutes)
This course provides practical, task-related knowledge and skills with a focus on agrichemical safety. The emphasis is on following workplace procedures and label instructions. For the practical component of the assessment, there are practical tasks on the day of course and after the course you are required to undertake a spray activity and provide your spray diary and documentation from your supervisor/employer confirming your competency Five Level 2 NZQA credits are available for this course.
Tue 2 Sep 2025
8:30 AM - 2:00 PM (5 hours 30 minutes)
This course provides practical, task-related knowledge and skills with a focus on agrichemical safety. The emphasis is on following workplace procedures and label instructions. For the practical component of the assessment, there are practical tasks on the day of course and after the course you are required to undertake a spray activity and provide your spray diary and documentation from your supervisor/employer confirming your competency Five Level 2 NZQA credits are available for this course.
Tue 2 Sep 2025
1 day, 8:30 AM - 4:30 PM (8 hours)
This course is for agrichemical users working independently (ie with little or no supervision) with responsibility for a single site/property, and may have responsibility for themselves and perhaps managing or supervising others. Eight Level 3 NZQA credits are available for this course.
Tue 2 Sep 2025
8:30 AM - 3:30 PM (7 hours)
This course is for existing Growsafe Certificate holders wishing to renew their current certificate. You must have a current certificate, or it must not be expired by more than 12 months. Eight Level 3 NZQA credits are available for this course.
Wed 3 Sep 2025
1 day, 8:30 AM - 4:30 PM (8 hours)
This course is for agrichemical users working independently (ie with little or no supervision) with responsibility for a single site/property, and may have responsibility for themselves and perhaps managing or supervising others. Eight Level 3 NZQA credits are available for this course.
Wed 3 Sep 2025
8:30 AM - 3:30 PM (7 hours)
This course is for existing Growsafe Certificate holders wishing to renew their current certificate. You must have a current certificate, or it must not be expired by more than 12 months. Eight Level 3 NZQA credits are available for this course.
Fri 5 Sep 2025
8:30 AM - 2:00 PM (5 hours 30 minutes)
This course provides practical, task-related knowledge and skills with a focus on agrichemical safety. The emphasis is on following workplace procedures and label instructions. For the practical component of the assessment, there are practical tasks on the day of course and after the course you are required to undertake a spray activity and provide your spray diary and documentation from your supervisor/employer confirming your competency Five Level 2 NZQA credits are available for this course.